Tuning Hammer in traditional turned steel for oblong tuning pins for early keyboard instruments

Tuning hammer in traditional turned steel for oblong tuning pins for early keyboard instruments

Size I (1) = 2.9mm x 6.0mm - Available to order
Size II (2) = 3.4mm x 6.5mm
Size III (3) = 3.9mm x 7.0mm
Size IV (4) = 4.4mm x 7.5mm

Reference : V then size number

9.00cm wide   9.00cm high   1.50cm deep
(3.54 inches wide  3.54 inches high  0.59 inches deep)